Be tv Belgium Selects Custom Consoles Module-R Desks

IBC 2019 Preview: Custom Consoles Announces Refinements to MediaWall, Module-R and SystemTwo
July 16, 2019
Custom Consoles Completes New Technical Furniture Projects for Radio Télévision Suisse
August 19, 2019
Show all

Be tv Belgium Selects Custom Consoles Module-R Desks

Image shows the 4.7 metre wide curved Module-R desk at Be tv Belgium.

August 13th, 2019 – Benelux broadcaster Be tv has chosen Custom Consoles Module-R studio control desks as part of a major expansion of its technical facilities. This new project comprises a total of seven desks which will integrated into Be tv’s headquarters in Charleroi.

“We were attracted to Custom Consoles by their evident long experience in producing attractively styled, ergonomically efficient and robust broadcast control room furniture,” says Be tv’s Broadcast Engineering & Maintenance Manager Serge Daneels. “The Module-R series formed a basis from which we could specify exactly the style and size of desks we needed without the high cost of commissioning tailor-made designs.”

Largest of the desks is a 7.27 metre wide by 2.64 metre curved master control room console designed for simultaneous use by up to eight production staff. Each team member has access to a dedicated 4U equipment pod positioned at the rear of the work surface.

Second in size is a 4.7 metre wide desk, also curved. Each of the the outer bays is equipped with two 4U equipment pods.

Desk 3 is an L-shaped design, 4 metres wide by 2.5 metres deep, with a 45 degree angled corner unit and a total of nine 4U high equipment pods. This is configured for use by four master control room operators.

Fourth desk in the project is a rectangular 2.2 metre wide ingest console with two bays, each bay equipped with dual 4U equipment pods. The left-hand bay is extended to provide additional horizontal space behind the worktop.

Desk 5 is a rectangular live production console, 3.1 metres in width and configured as two identical bays. Each bay of this unit is equipped with dual 4U high equipment pods offset to the right. An EVS vision mixer control panel is embedded directly into the left segment of the right-hand bay.

Desk 6 is similar in configuration to Desk 5 but with an EVS vision mixer control panel embedded into the left-hand bay and a total of five 4U high equipment pods. This too is assigned for use as a live production console.

The seventh desk is a compact single-bay live production console, just over 1 metre in width and fitted with two 4U high equipment pods.

All seven desks are finished in grey with dark blue Marmoleum worktop surfaces and silver anodised extruded aluminium legs with steel skids. All equipment pods adjoin the worktop rear and are positioned with the front facias sloping back at 45 degrees from vertical. Concealed cable ducting from floor level for is provided via the legs and between all desk bays.

A mix-and-matchable control room furniture range, Custom Consoles’ Module-R enables aesthetically attractive long-life desks to be configured in a variety of shapes and dimensions from a selection of high-quality pods, base sections, 19 inch rack housings, worktops, end-panel modules and legs. Coordinated desk pods are available as single-bay sections with up 10 rack unit chassis capacity.Module-R has been tested by FIRA to ensure compliance with current ISO standards. It is supplied with full cable management and internal 19 inch racking, accessible via removable front and rear cover panels. All rear surfaces and pods are completely interchangeable. A full length cable brush enables easy reconfiguration.

Serving viewers in Belgium and Luxembourg, Be tv (www.betv.be), formerly Canal+ Belgique (launched on September 27th, 1989), is a digital cable television platform which commenced transmission on August 29th, 2004. Based in the Evere district of Brussels, Be tv transmits a multiplex comprising 10 television channels: Be 1, Be 3D, Be 1 HD, Be 1+1h, Be Séries HD, Be Ciné HD, Be Sport 1 HD, Be Sport 2 HD and Be Sport 3 HD.

Custom Consoles Ltd is an ISO 9001 certified manufacturer of project-specific and modular broadcast, process-control and security furniture. Its product range includes motorised, manually-adjustable and fixed-height units plus fan-cooled sound-insulated equipment housings. The company operates from a 1,200 square metre UK-based production facility equipped with 3D computer-aided-design facilities, computer-controlled cutting machinery and a thermoform press. These resources provide the dual benefits of precise quality control and prompt delivery times, typically 21 days from receipt of order. Custom Consoles’ clients include governmental and corporate organisations in Europe, the Middle East, Asia and Australasia.

Contacts for further information

Newsmedia support: David Kirk, Stylus Media Communications
Tel: +44 (0)1342 311 983 | Email: stylusmedia@gmail.com

Custom Consoles: Gary Fuller
Tel: +44 (0)1525 379 909

Custom Consoles Ltd, Leedon House, Billington Road, Leighton Buzzard, LU7 4TN, UK
Tel: +44 (0)1525 379 909 | Fax: +44(0)1525 370 237
Web: www.customconsoles.co.uk